CleancoCleanco

pr88 Skin Protection Cream

Skin protection cream for oily, greasy working areas and heavy soiling skin.

Product description

Skin protection cream (type O/W emulsion), water-soluble, structural viscous, non-oily, protects in the oily, greasy working area and when exposed to heavy soiling. With proper dosage, it will leave no finger prints.

Contains no preservatives or silicones.

1. Rub in before work
2. Work
3. After work rinse skin with a small amount of water, the dirt is washed-off together with pr8

Function

When applied to the skin, pr88 forms a dry, elastic and strong protective film as an effective contact barrier between the skin and working substances. The tenside content of the protective film makes it possible to rinse away the dirt simply with water alone after work has been completed. PR88 protects against the need to use improper skin cleansers, one of the main causes of skin damage. The skin functions (e.g. breathing, giving off of moisture, sensing) are not affected.

Field of application

Protects the skin when working with oil, grease, paint, lacquer, tar, adhesives, resins, fibre-glass, polyester, silicone compounds, PU-adhesives, soot, dust, etc.

Usage and dosage

Before work as well as after washing your hands or contact with water.
Dosage: 2 – 3 ml per application.

Container sizes

100 ml tins
1 litre cans
1.6 litre dispenser cartridges
10 litre buckets

 
 

pr99 Skin protection lotions

Skin lotion for moist & wet working areas. High fat content.

Product description

Skin protection lotion (type W/O emulsion), water-insoluble, oily, medium viscous, spreads easily, with vitamin E-acetate.

For the protection of skin against water and water-mixed systems.

Silicone-free.

Slightly perfumed or if required, un-perfumed.

Function

In wet and moist working areas, pr99 protects against water and water-mixed systems, e.g. cooling lubricants, washing and cleansing solutions, moist contaminants, concrete, mortar, when gardening, in food industry, in nursing (homes/hospitals).

It can also be used as care for dry or severely degreased skin after work.

Field of application

Protects the skin when working with oil, grease, paint, lacquer, tar, adhesives, resins, fibre-glass, polyester, silicone compounds, PU-adhesives, soot, dust, etc.

Usage and dosage

Rub into clean, dry hands before work, and also as needed, during and after work breaks. Dosage: approx. 0.5 – 1 ml.

Container sizes

100 ml bottles
1 litre standard bottles

 

prDry Hands Skin Protection Gel

Skin Gel for wet working areas. For use with or without protective gloves, wet working areas or when exposed to extra stress.

Product description

Skin protection gel (type fat-free hydro gel) with an innovative combination of two active ingredients providing a skin firming and sweat reducing effect.

No fragrances, no preservatives.

Function

Perspiration under airtight conditions can create a build up of moisture and wetness. The skin softens, swells and loses both its mechanical strength and its natural role as a barrier.

prDry Hands reduces formation of sweat and works against softening of the skin.

prDry Hands protects and hardens the skin when it is exposed to dangerous stimuli and moist working areas.

prDry Hands gently inhibits any inflammation and hinders the excessive growth of germs.

Container sizes

100 ml-bottles
1 litre standard bottles

Field of application

When wearing airtight protective gloves (latex, nitril, rubber etc.), boots, industrial footwear.

For use in wet and moist working areas. When the skin is exposed to dangerous stimuli (e.g. fibreglass and dust). To prevent fingerprints.

Usage and dosage

Depending on exposure, apply 1 – 2 times daily on dry, clean skin and rub well in until, after about 30 seconds, the skin feels dry. The efficacy of prDry Hands does not fully develop at first application. It increases, when used daily, in the first 3 – 4 days, and remains thereafter at the same level.

Dosage: 0.5 – 1 ml.

 
 
 

prUV Skin protection lotion

Skin lotion when exposed to UV-radiation water-resistant, LPF 20

Product description

UV skin protection lotion (type W/O emulsion with suspended titanium dioxide and zinc oxide) for protection against UVA, UVB and UVC radiation, transparent, water-resistant, easily spreadable, slightly perfumed, with vitamin E-acetate, panthenol and beeswax.

Does not contain preservatives, colouring or silicones.

Function

prUV protects the skin in UVA, UVB and UVC ranges uniformly over the entire duration of application (photostable).

It has increased skin compatibility due to the anti-inflammatory properties of zinc oxide and vitamin E-acetate as well as the non-usage of preservatives.

Container sizes

100 ml bottles
1 litre standard bottles

Field of application

Workplaces with intensive radiation by sunlight or technical UV radiation sources, e.g. electric arc with electric welding, mercury pressure lamp for the hardening of plastics, drying of paint, sterile boxes.

Also can be used for water sports and other leisure-time activities.

Usage and dosage

Apply before exposure to sunlight or UV radiation. For all areas of the skin including the face. Rub in the lotion evenly until white traces disappear. After washing with soap and drying, application must be repeated.

For hands and face approx. 0.5 – 1 ml respectively.

 

prFacial protection

Skin Protection Cream when exposed to UV-radiation water-resistant protects from lacquer hazes during lacquering jobs.

Product description

High fat content, viscous, white W/O emulsion based on an exceptional skin friendly combination of good absorbing and covering lipid working components.

Silicon-free, lightly perfumed and preserved.

Function

A cream with high fat content and very good skin tolerance with a separating film that prevents colour and lacquer mists from sticking to the skin. It makes the skin water repellent, retains skin moisture and skin suppleness and prevents roughness and chapping of the skin.

Container sizes

325 ml can

Field of application

As a facial protection for personnel working with sprays, prFacial protection prevents colour/lacquer mist from sticking to the skin. Lacquer and cream can be removed with a wipe.

Further use:
Protection in wet and humid working areas. Also used for skin care where high fat content is required (chapped, dry skin, cold protection cream).

Usage and dosage

Always use on clean and dry skin. Rub in lightly and evenly as a facial protection against colour/lacquer hazes. Carefully massage it in as a protection in wet or moist working conditions as well as for care where a high fat content is required.

For face and hands: approx. 0,5 ml respectively.